Reliawave 802.11b/g High Power (250mW) Outdoor Wireless CPE with Integrated 15dBi Antenna

The Reliawave RWR is a 2.4 GHz 802.11b/g compatible client bridge/route this is completely integrated in to a N connector up to 52dBm EIRP or 160 Watts EIRP of power with a 24dBi grid! Designed with ease of installation in mind, RWR simplifies subscriber installation with its Integrated Antenna, Power over Ethernet (PoE), 'Plug and Play' installation and software power controlled capability. Housed in a weatherproof aluminum enclosure, the RWR is built to operate in harsh environments. This device can be installed on the building exterior as well as indoors. RWR delivers reliable performance under all claimant conditions, withstanding temperatures between -40C ~ +75C. Driverless Operation - The self-contained RWR unit can be mounted on a pole or wall. With the included POE the RWR can be powered over the standard Ethernet CAT-5 cable. RWR also features plug-and-play installation that enables quick and efficient deployment. It works with all WiFi™ compatible IEEE 802.11b/g Access Points and eliminates complicated client installations and driver conflicts with various OS. The RWR delivers outstanding network availability and end-to-end system throughput. Perfect for applications requiring high bandwidth at a fraction of the cost of DS3/T1/E1 leased-line, with the additional advantage of zero monthly recurring cost from the service carrier. Typical usages include bridging satellite offices, corporate LANs, school campus, as well as wireless Internet services, at distances up to 35+ miles (Link Budget Calculator). The Reliawave RWR is also the solution of choice for bridging networks that are impossible to connect using wired alternatives, including networks separated by difficult terrain, railroads, or bodies of water.

Features at a glance
- Integrated rugged weatherproof design in a compact and stylish enclosure with all electronics protected in aluminum for EMF protection.
- Ideal for wireless LAN access in all indoor and outdoor areas.
- Flexible mounting on wall or antenna mast (up to 2.5 inch diameter)
- Can be mounted for Horizontal or Vertical Polarities
- Powered through Ethernet cable using PoE injector
- Enhanced integrated lighting protection
- 10/100Mb Ethernet POE port
- Works with all Operating Systems
- Auto Fall back data rate for long distance communication in noisy environments
- High level security with full WPA(TKIP), WAP2(AES) with RADIUS authorization and 64/128Bit WEP Encryption
- MAC level access control
- RTS/CTS - Fragmentation Control
- 802.11d Spanning Tree
- ACK Timeout Support (Distance Setting)
- Adjustable output power from 1.58 Watt to 20Watts EIRP
- AP Client, AP Client Router, AP Router, AP Bridge, PtP Bridge, and WDS Modes
- IAPP Support
- 802.11g Protection Support
- PPPoE/PPtP Client and PPPoE Relay
- DHCP Server, Client and Relay
- Static and NAT Router
- OLSRD Mesh (http://www.olsr.org/)
- IP Aliasing
- Bi-Directional Traffic Shaping with QoS (VoIP) via IP or MAC
- Firewall: Port Forwarding, Port/IP/MAC Filtering, DMZ
- Dynamic DNS via DynDNS
- Watchdog Timer
- Wireless Site Survey and Single level data
- Web base Management System
- Web and TFTP firmware upgrade support
- Compatible with IEEE 802.11b/g & IEEE 802.3 standards.
- Firmware can be remotely upgraded