RWO Plus Outdoor High Power 250mW 802.11b/g CPE/AP/Bridge/Router
with 19dBi Integrated Antenna - 43dBm/20 Watts EIRP!!!
POE

The Reliawave RWO Plus is an 2.4 GHz 802.11b/g compatible client bridge/route this is completely integrated in to a 19dBi antenna delivering up to 43dBm EIRP or 20 Watts EIRP of power!. The 19dBi integrated antennas comply with FCC standards. Designed with ease of installation in mind, RWO Plus simplifies subscriber installation with its Integrated Antenna, Power over Ethernet (PoE), 'Plug and Play' installation and software power controlled capability. Housed in a weatherproof aluminum enclosure, the RWO Plus is built to operate in harsh environments. This device can be installed on the building exterior as well as indoors. RWO Plus delivers reliable performance under all climatic conditions, withstanding temperatures between  -30C ~ +65C. Driverless Operation - The self-contained RWO Plus unit can be mounted on a pole or wall. With the included POE the RWO Plus can be powered over the standard Ethernet CAT 5 cable. RWO Plus also features plug-and-play installation that enables quick and efficient deployment. It works with all WiFi™ compatible IEEE 802.11b/g Access Points and eliminates complicated client installations and driver conflicts with various OS. The RWO Plus delivers outstanding network availability and end-to-end system throughput. Perfect for applications requiring high bandwidth at a fraction of the cost of T1/E1 leased-line, with the additional advantage of zero monthly recurring cost from the service carrier. Typical usages include bridging satellite offices, corporate LANs, school campus, as well as wireless Internet services, at distances up to 15+ miles (Link Budget Calculator). The Reliawave RWO Plus is also the solution of choice for bridging networks that are impossible to connect using wired alternatives, including networks separated by difficult terrain, railroads, or bodies of water.
  • Features at a glance
    • Integrated 15dBi antenna, rugged weatherproof design in a compact and stylish enclosure with all electronics protected in aluminum for EMF protection.
    • Ideal for wireless LAN access in all indoor and outdoor areas.
    • Flexible mounting on wall or antenna mast (up to 2.5 inch diameter)
    • Can be mounted for Horizontal or Vertical Polarities
    • Powered through Ethernet cable using PoE injector
    • Enhanced integrated lighting protection
    • 10/100Mb Ethernet POE port
    • Driver-less operation with true 'Plug and Play'
    • Works with all Operating Systems
    • Auto Fall back data rate for long distance communication in noisy environments
    • High level security with full WPA/TKIP authorization and 64/128Bit WEP Encryption
    • RTS/CTS - Fragmentation Control
    • ACK Timeout Support
    • Adjustable output power from 5Watt to 20Watts EIRP
    • AP Client, AP Client Router, AP Router, AP Bridge, PtP Bridge, and WDS Modes
    • PPPoE Client
    • DHCP Server and Client
    • Static and NAT Router
    • Bi-Directional Traffic Shaping with QoS (VoIP)
    • Firewall
    • Watchdog Timer
    • Wireless Site Survey
    • SNMP Support
    • Web base Management System
    • TFTP firmware upgrade support
    • Compatible with IEEE 802.11b/g & IEEE 802.3 standards.
    • Firmware can be remotely upgraded
RWO Plus Outdoor High Power 250mW 802.11b/g CPE/AP/Bridge/Router
with 19dBi Integrated Antenna - 43dBm/20 Watts EIRP!!!
 Description  RWO Plus High Power 250mW 802.11b/g Wireless Outdoor CPE/AP/Bridge/Router
 Ethernet Connection  IEEE 802.3 10BaseT (RJ-45)
 Standard  IEEE 802.11b/g (Wireless LAN)
 IEEE 802.3 (Ethernet)
 Network Interface  1 x 10/100Mb
 Operation Functions

 High level security with full WPA/TKIP authorization and 64/128Bit WEP Encryption
 RTS/CTS - Fragmentation Control
 ACK Timeout Support
 Adjustable output power from 5Watts to 16Watts EIRP
 DHCP Server and Client
 Static and NAT Router
 Bi-Directional Traffic Shaping with QoS (VoIP)
 Firewall
 Watchdog Timer 
 Wireless Site Survey
 SNMP Support
 NTP Client
 Built in traceroute and ping commands
 PPPoE Client with MSCHAP, CHAP, MPPE authorization
 Radius Server and PPtP Authorization
 Operation Modes  AP Client, AP Client Router, AP Router, AP Bridge, PtP Bridge, and WDS Modes
 Management   Web base Management System
 Lighting Protection  Enhanced integrated lighting protection
 External Power Jack ( via POE)  48 VDC @ 500mA (O.D - 5.5mm, I.D - 2.1mm) (POE and PS included)
 External Bulkhead connector  External RJ-45 Bulkhead connector
 Mounting  Pole or wall mount via 2 pc clamps (included)
 Enclosure  Water Tight Aluminum Enclosure
 CPE Weight  3 lbs
 Shipping Weight  4.5 lbs
 Dimension   H=13.8in W=15.5in D=3.5in
 Temperature Range  -30C ~ +65C
 Relative Humidity  10% to 90% non condensing
 Warranty  1 Year Parts & Labor
 Manual
 Firmware
 Antenna Characteristics
 Gain  19dBi
 Frequency Range  2400 – 2500 MHz
 Polarization  Horizontal or Vertical
 Horizontal Beamwidth  16 Degrees
 Vertical Beamwidth  17 Degrees
 Radio Characteristics
 Modulation  Direct Sequence Spread Spectrum
 Frequency Range  2.4 GHz - 2.4965 GHz
 Data Rate  6-54 Mbps : OFDM
 11 Mbps : CCK
 5.5 Mbps : CCK
 2 Mbps : DQPSK
 1 Mbps : DBSK 
 Channels  11 - US (FCC)
 14 - Japan (MKK)
 13 - Other counties (ETS)
 Range  up to 15+ miles PtMP, 25+ miles PtP
 Output Power

 Output 20Watts with antenna / 250mW at Radio
 250mW 802.11b 11Mb Data Rate
 100mW 802.11g 54Mb Date Rate

 Receiver Sensitivity

 At Radio 802.11b 11Mb@-87dBm /  With Antenna: 11Mb@-106dBm
 At Radio 802.11g 54Mb@-65dBm /  With Antenna: 54Mb@-84dBm

 Approvals  FCC Part15, Section 15,247
 

Pricing
Part Number
Description
DT-RWO-Plus-HPG-19A-LP-CO3
 802.11b/g RWO HP (250mW) Plus w/ integrated 19dBi antenna
with Cat5 Bulkhead Coupler and integrated POE lighting protector
Online Store - Office: 207-667-7583/8643/7624/4550 | efax: 207-433-1008